66
Care and maintenance - Section 10
10.4 Error detection
The Moisture Analyzer utilizes an audio tone to indicate an error. A normal button press or entry results in a short,
high pitched tone. When an entry is incorrect or an improper button is pressed, a low pitched tone is emitted. There
are no system error codes shown on the displays.
10.5 Service information
If the Troubleshooting section does not resolve or describe your problem, you will need to contact an authorized
Ohaus Service Agent. For Service assistance in the United States, please call Aftermarket, Ohaus Corporation toll-free
at (800) 526-0659. An Ohaus Product Service Specialist will be available to help you.
10.6 Accessories
Description Ohaus Part No.
Span Calibration Mass 20 g ASTM Class 1 Tolerance 49024-11
Security Locking Cable 470004-01
RS232 Interface Cable, 9 pin serial extension - PC to MB45 80500525
RS232 Interface Cable, MB45 to printer (25 pin) SF42 80500571
Data Printer SF42
Sample Pans 90mm diameter 80850086
Glass Fiber Pads 80850087
Pan, re-usable - 90mm (set of three) 80850088
In-use Cover 80850085
Temperature Calibration Kit 11113857
To Next Page
Loading...
