Oki C911dn

- 250 -
Setting the network from the web browser
5
1
2
4
3
Convenient print
functions
Appendix Index
Checking and
Changing Printer
Settings Using
the Control Panel
Network
Setup
Matching
Colors
Using Utility
Software

Using PEAP
4
Select [Enable] in [IEEE802.1X].
5
Select [PEAP] in [EAP Type].
6
Enter the user name in [EAP User].
7
Enter the password in [EAP Password].
8
Enable [Authenticate Server].
9
Click [Import of CA Certicate].
Memo
z
If [Not authenticate Server] is enabled, it is not
necessary to import the CA certicate.
If [Not authenticate Server] is enabled, disable
whether or not to connect to the correct
authentication server.
The "Import of CA Certicate" screen will be
displayed.
10
Enter the CA certicate le name, and
click [OK].
Memo
z
The imported CA certicate is the authenticator
certicate issued by the RADIUS server certicate.
z
Importable le formats are PEM, DER, and PKCS#7
formats.
The CA certicate will be imported to the printer.
11
Click [Submit].
12
The settings will be save in the device,
and the network functions will restart.
If the standby screen is displayed in the
control panel, turn OFF the device power
supply.
Reference
z
For how to turn OFF the power supply, see "Basic".
z
Go to “Connecting the device to the authentication
switch” (P.252).