Oki C911dn

- 297 -
Table of setting items in the device setup screen
1
2
3
5
4
Convenient print
functions
Appendix Index
Checking and
Changing Printer
Settings Using
the Control Panel
Network
Setup
Matching
Colors
Using Utility
Software

Power settings
z
Shaded areas are factory-set values.
Item Details
Power save Enable
Disable
Enables/disables power save mode.
Sleep
Enable
Disable
Enables/disables sleep mode.
Auto Power OFF
Enable
Auto Setting
Disable
Sets auto power OFF mode.

Others Setup
z
Shaded areas are factory-set values.
Item Details
RAM Setup Incoming buffer size Auto
0.5 MB
1 MB
2 MB
4 MB
8 MB
16 MB
32 MB
Sets the incoming buffer size that is assured by the
local interface.
Resource save area
Auto
OFF
0.5 MB
1 MB
2 MB
4 MB
8 MB
16 MB
32 MB
Sets the resource saving area size.
Flash memory
settings
*1
*1: Displayed
when the
control panel
[Common
storage
settings]>
[Enable
initialization]
is set to [Yes].
Initialize Implement Initializes ash memory.
PS ash size nn% [n.n MB] Sets the Percentage of PS area in the resident ash
memory.