Oki MC873dn - Page 153

45850101TH Rev.1
4-3
Oki Data CONFIDENTIAL
4. REPLACEMENT OF PARTS
Maintenance Tools:
Table 4-1-1 shows the tools necessary to replace printed-circuit boards and units.
Table 4-1-1: Maintenance Tools
No. Maintenance Tool Quantity Use Remarks
1
No. 2-200
screwdriver with
magnetic tip
1
3- to 5-mm
screws
2
Screwdriver No.
3-100
1
3
Screwdriver No.
5-200
1
4
Digital multimeter 1
5
Pliers 1
6
Handy vacuum
cleaner (toner
vacuum)
1 See note.
7
E-ring pliers 1
E-shaped ring
removal
Note! Use a toner vacuum. Using a general-purpose vacuum may cause toner to
catch fire.
Table 4-1-2 shows the tools necessary to use Maintenance Utility software.
Table 4-1-2: Maintenance Tools
No. Maintenance Tool Quantity Use Remarks
1
Notebook personal
computer (with
Maintenance Utility
software installed)
1
3- to 5-mm
screws
See section
5.2 for
Maintenance
Utility.
2
USB cable 1
3
Ethernet cable
(crossover cable)
1
Screws in use:
Shape Designation
Screw (silver) (6mm)
Screw (silver/8mm)
Round-head screw (black)
Screw (black)