45850101TH Rev.1
4-6
4.2.3 Cover side-L-upper / Cover side-L
(1) Remove the image drum unit/belt unit. (Refer to section 4.2.1)
(2) Detach the fuser unit. (Refer to section 4.2.2)
(3) Unlatch the two claws and remove the Cover side-L-upper
①
.
(4) Remove the three screws (silver)
②
and detach the cover side-L
③
.
③
②
②
②
①
claw
A
view A
4.2.4 Cover side-R-upper / Cover side-R
(1) Remove the image drum unit/belt unit. (Refer to section 4.2.1)
(2) Detach the fuser unit. (Refer to section 4.2.2)
(3) Unlatch the two claws and remove the cover side-R-upper
①
.
(4) Open and remove the Cover-stapler
②
.
(5) Remove the four screws (silver)
③
and detach the cover side-R
④
.
(6) Open and remove the Cover-WLAN
⑤
from the cover side-R
④
.
(7) Disconnect the WLAN-cable
⑥
from the board
⑦
to detach the board
⑦
.
②
③
③
③
④
⑤
⑦
⑥
①
③
①
Claw
view A
To Next Page
Loading...
