Oki MC873dn - Page 157

45850101TH Rev.1
4-7
Oki Data CONFIDENTIAL
4. REPLACEMENT OF PARTS
4.2.5 Rear cover Assy.
(1) Slide out the Duplex unit
①
from the Main body of MFP.
(2) Remove the belt unit. (Refer to section 4.2.1)
(3) Detach the cover side-L. (Refer to section 4.2.3)
(4) Detach the cover side-R. (Refer to section 4.2.4)
(5) Remove the two screws (silver)
②
.
(6) Open the face-up stacker cover and remove the two screws (black)
③
.
Notes on assembling:
When assembling the Face-up stacker, tight the screws
③
in order of
③
-a to
③
-b.
(7) Release the four tabs and detach the rear cover Assy
④
.
①
②
②
Face-up stacke
r
③-a
③-b
Ta b
④