45850101TH Rev.1
4-17
4.2.10.4 ADF-unit / CONN Cord / Film-Guard(L) / Film-
Guard(R)
(1) Remove the cover-ADF-R. (See 4.2.10.1)
(2) Disconnect a connector
of the CONN Cord
①
from the ADF relation board(7RL),
remove the screw (silver, No:42920406)
②
and FG cable of the CONN Cord
①
,
and disconnect each cables
③
of two moters, and detach those cables from the
groove of the ADF-unit
④
.
(4) Open the ADF-unit
④
while pushing the portion A.
FG cable
①
③
④
A
④
(3) Remove two screws (black: 42932710)
⑤
.
⑤
⑤
To Next Page
Loading...
