45850101TH Rev.1
4-38
4.2.18 Guide Assy.-eject
(1) Detach the top cover Assy. (Refer to section 4.2.13)
(2) Disconnect the eject three cables
①
.
(3) Remove a screw (silver)
②
to remove Plate-Bracket
③
.
(4) Remove the three screws (silver/8mm)
④
.
(5) Pull the post out of the side-L Assy. and detach the Guide Assy.-eject
⑤
.
Note! Notice to deal of the spacer of screws to fasten the Guide Assy-eject
⑤
to the
Side-L Assy.
Post
Side-L Assy.
Speacer
①
④
②
④
⑤
③
(①)
①
4.2.19 Post-fuser-lock
(1) Remove the fuser. (Refer to section 4.2.2)
(2) Remove the post-fuser
①
.
Notes on attaching:
Assemble the post-fuser
①
with the following positions in mind.
Assembling positions
For 100V/120V For 230V
To Next Page
Loading...
