45850101TH Rev.1
2-24
2. TROUBLESHOOTING PROCEDURES
No. Category PJL Status
Code
Panel messages Description
77 Error 40764 Please check
POP3 settings.
Please see Help for
details.
Indicates that failed to connect with POP3 server.
78 Error 40763 SMTP Login failed.
Please see Help for
details.
Indicates that failed to login in SMTP server.
79 Error 40762 SMTP Auth.
Unsupported.
Please see Help for
details.
Indicates that authentification is unsupported by
SMTP server.
80 Error 40761 POP3 Login failed.
Please see Help for
details.
Indicates that failed to login in POP3 server.
81 Error 40758 Indicates that LDAP Server connection is failed.
82 Error 40757 Indicates that failed to login in LDAP Server.
83 Error 40756 Indicates that the communication with LDAP
Server was disconnected by the unknown
reasons.
84 Error 40754 Indicates that the Serarch Root is not found out in
LDAP Server.
85 Error 40753 Indicates that the address search is failed by
time-out error.
86 Error 40812 Getting target IP
failed.
Please check
DHCP settings.
Please see Help for
details.
Indicates that DHCP server is not found out.
Scan to E-mail, Scan to Network PC and Scan
to Remote PC (WSD) are unusable during this
status occurring.
This message is displayed by the timing when
"Mail", "Network PC" icons were pressed with a
"Scan Menu" screen.
87 Error 40752 Failed to connect
to DNS server.
Please check DNS
settings.
Please see Help for
details.
Indicates that failed to connect DNS Server.
The same message is displayed, if name
resoution is failed in DNS server.
88 Error 40751 Please check
Server setting.
Please see Help for
details.
Indicates that failed to connect with file server.
No. Category PJL Status
Code
Panel messages Description
89 Error 40750 Server Login failed.
Please see Help for
details.
Indicates that failed to login in CIFS or FTP
server.
90 Error 40718 Entering directory
failed.
Please see Help for
details.
Indicates that failed to access in directory of FTP
server.
91 Error 40744 Changing data
Transfer Type
failed.
Please see Help for
details.
Indicates that the data transfer type of FTP server
is not supported by this unit.
The file sending will be success by the changing
of data transfer type in FTP serve.
92 Error 40592
40743
File writing failed.
Please see Help for
details.
Indicates that failed to make image file in file
server during Scan To Network PC executing.
93 Error 40742 FTP destination
Full.
Please see Help for
details.
Indicates that the file sending is failed because
of FTP Server doesn't have enough free space in
strage device. (FTP Server)
94 Error 40741 Please change File
Name.
Please see Help for
details.
Indicates that the file sending is failed because of
the file name is not permission. (FTP Server)
95 Error 40594
40740
Device
communication
protocol not
supported.
Please see Help for
details.
Indicates that the server does not support CIFS/
F TP.
96 Error 40739 Please check
Network Share
Name.
Please see Help for
details.
Indicates that the network folder name is wrong.
(CIFS Server)
To Next Page
Loading...
