Okuma OSP-P20L - Feed Per Revolution (G95)

5238-E P-43
SECTION 4 PREPARATORY FUNCTIONS
4. Feed Per Revolution (G95)
[Function]
Specify G95 to control tool movement (feedrate) in terms of "distance per spindle revolution" for
turning operations.
[Programming format]
G95 F__
[Details]
• The allowable maximum feedrate depends on the machine specifications.
• On turning on the power, and after reset, the feed per revolution mode is selected.
5. Feed Per Minute (G94)
[Function]
Specify G94 to control tool movement (feedrate) in terms of "distance per minute" for turning
operations.
[Programming format]
G94 F__
[Details]
• The allowable maximum feedrate depends on the machine specifications.
F : Specify movement distance per spindle revolution.
The unit of setting is determined according to the setting for the optional parameter (UNIT)
F : Specify tool movement distance per minute.
The unit of setting is determined according to the setting for the optional parameter (UNIT)