OPERATION GUIDE xi
PRECAUTIONS FOR USE
Cautions when using the copier
Warning
DO NOT place metallic objects or containers with water (flower
vases, flower pots, cups, etc.) on or near the copier. This type of
situation presents a danger of fire or electrical shock should they
fall inside.
DO NOT remove any of the covers from the copier as there is a
danger of electrical shock from high voltage parts inside the
copier.
DO NOT damage, break or attempt to repair the power cord. DO
NOT place heavy objects on the cord, pull it, bend it
unnecessarily or cause any other type of damage. These types
of situations present a danger of fire or electrical shock.
NEVER attempt to repair or disassemble the copier or its parts
as there is a danger of fire, electrical shock or damage to the
laser. If the laser beam escapes, there is a danger of it causing
blindness.
If the copier becomes excessively hot, smoke appears from the
copier, there is an odd smell, or any other abnormal situation
occurs, there is a danger of fire or electrical shock. Turn the
power switch OFF ({) immediately, REMOVE THE POWER
PLUG from the outlet and then contact your service representative.
If anything harmful (paper clips, water, other fluids, etc.) falls into
the copier, turn the power switch OFF ({) immediately. Next,
BE ABSOLUTELY CERTAIN to remove the power plug from the
outlet to avoid the danger of fire or electrical shock. Then contact
your service representative.
DO NOT remove or connect the power plug with wet hands, as
there is a danger of electrical shock
ALWAYS contact your service representative for maintenance
or repair of internal parts.
To Next Page
Loading...
Need help?
General