System Setting
OPERATION GUIDE 5-21
2
Press U or V to display 50.Auto Clear.
3
Press [OK].
4
Press U or V and select On in the case where the transition to Auto Clear
is to be made or Off when it is not.
5
Press [OK]. The display will return to that of Step 2.
Auto Sleep Setting
Set whether or not to automatically enter Sleep Mode when copying is
completed or after operations have been finished.
1
Display the System Menu. (Refer to System Menu Operations
Procedures on page 5-7.)
2
Press U or V to display 51.Auto Sleep.
3
Press [OK].
4
Press U or V and select On in the case when the transition to Auto Sleep
is to be made or Off when it is not.
5
Press [OK]. The display will return to that of Step 2.
NOTE: If the Auto Sleep function interferes with your copy operations,
disable the function. Before disabling the Auto Sleep function, you may
want to try lengthening the amount of time before the Auto Sleep function
engages.
Auto Clear Time
Set the time interval to automatically return the copier to Ready to copy.
state when copying is finished.
1
Display the System Menu. (Refer to System Menu Operations
Procedures on page 5-7.)
2
Press U or V to display
52.AutoClearTime.
3
Press [OK].
System Menu:
50.Auto Clear
System Menu:
51.Auto Sleep
System Menu:
52.AutoClearTime
To Next Page
Loading...
Need help?
General