System Setting
5-20 OPERATION GUIDE
5
Press [OK]. The display will return to that of Step 2.
Selecting Auto Rotation
The auto rotation delivers the sets of copied documents perpendicular to
each other, allowing an easy separation of each set from the others.
1
Display the System Menu. (Refer to System Menu Operations
Procedures on page 5-7.)
2
Press U or V to display 48.Auto
Rotation.
3
Press [OK].
4
Press U or V and select On when the sets of copied documents are to be
rotated and Off when no rotation is to be performed.
5
Press [OK]. The display will return to that of Step 2.
Silent Mode Transition Time
Shortens the amount of time the internal motor continues to run after the
copy is produced. Use this setting in cases when the motor noise is
bothersome.
1
Display the System Menu. (Refer to System Menu Operations
Procedures on page 5-7.)
2
Press U or V to display 49.Silent
mode.
3
Press [OK].
4
Press U or V and select the amount of time for transition into Silent Mode.
5
Press [OK]. The display will return to that of Step 2.
Auto Clear Setting
Set whether or not to automatically return the copier to Ready to copy.
state when copying is finished.
1
Display the System Menu. (Refer to System Menu Operations
Procedures on page 5-7.)
System Menu:
48.Auto Rotation
System Menu:
49.Silent mode
To Next Page
Loading...
Need help?
General