System Setting
5-8 OPERATION GUIDE
NOTE: The message display will return to the Ready to copy. by
pressing [Reset].
You can cancel the setting by pressing [Stop/Clear].
4
Press [OK].
Procedure for Changing the Default Settings
The procedure for changing each of the items in the System Menu is
described below.
User Status Report
Outputs a list of the values set for the System Menu items.
NOTE: Check to make sure that Letter/A4 size paper is loaded in the
cassette.
1
Display the System Menu. (Refer to System Menu Operations
Procedures on page 5-7.)
2
Press U or V to display 01.Copy
Status.
3
Press [OK].
4
Press U or V and select Yes.
5
Press [OK]. The report will be output.
Sample: User Status
Report
Message Language
You can select the language of the message display by following the
procedure given below.
System Menu:
01.Copy Status
USER COPY SETTING LIST
F00 : [ - - - - - - - - - - - - - - - - - - - - - - - -] ==========
F01 : [ - - - - - - - - - - - - - - - - - - - - - - - -] ==========
F02 : [ - - - - - - - - - - - - - - - - - - - - - - - -] =======
F03 : [ ======= ] ==========
F04 : [ ===== ] ==========
F05 : [ ==== ] =======
F07 : [ ====== ] ==========
F08 : [ ====== ] ==========
F09 : [ = ] ==========
F10 : [ = ] ========
F11 : [ = ] ==========
F12 : [ = ] ========
F13 : [ ====== ] ==========
F14 : [ ====== ] ==========
F15 : [ ====== ] ==========
F16 : [ ===== ] ==========
F17 : [ ==== ] =========
F18 : [ ====== ] ==========
To Next Page
Loading...
