33
Sales Transactions
Entering and Exiting the Register Mode
1. Turn the control switch to the REG or JRNL position. Remember that the JRNL position registers all sales transactions
on the journal record while the REG position provides customer receipts.
2. If the Clerk System option was set to active and a clerk code was programmed, enter the related Clerk number assigned
and press
, type its associated three-digit secret code and then press .
If the Clerk System option was set to active and a secret code was not programmed, type any Clerk number to
and then press .
Date and Time Display
You can display the current date and time outside of a sales transaction by pressing to display the date and
to display the time with the cash register in either the REG or JRNL mode.
To Next Page
Loading...
