EasyManuals Logo

Olympus 38DL PLUS Basic Operation Manual

Olympus 38DL PLUS
112 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #43 background imageLoading...
Page #43 background image
DMTA-10009-01EN [U8778346], Rev. D, November 2016
Powering the 38DL PLUS
35
When the battery is fully charged, the battery charging symbol (lighting bolt) is
replaced with a “full battery” symbol (battery with all bars full). This is the indication
that the battery is fully charged (see “Power Indicator” on page 31). It takes
approximately 2 to 3 hours to fully charge a battery depending on its initial
conditions.
It may take several cycles of complete charging and discharging of the battery to bring
the battery to full capacity. This conditioning process is normal for this type of
rechargeable batteries.
Battery Usage Instructions
If the battery is used daily (or frequently), connect the instrument to the
charger/adaptor when not in use.
Whenever possible, the instrument should remain connected to the EP-MCA
charger/adaptor (overnight or over a weekend), so that the battery reaches a full
charge.
The battery must reach full charge on a regular basis for proper capacity and
cycle-life maintenance.
Fully recharge discharged batteries as soon as possible after use.
Battery Storage Instructions
Never store discharged batteries without a full recharge.
Store batteries in a cool, dry environment.
Avoid long-term storage under sunlight or in other excessively hot places such as
the trunk of an automobile.
While in storage, fully recharge batteries at least once every two (2) months.
NOTE
NOTE

Table of Contents

Other manuals for Olympus 38DL PLUS

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Olympus 38DL PLUS and is the answer not in the manual?

Olympus 38DL PLUS Specifications

General IconGeneral
Operating Temperature-10 °C to 50 °C (14 °F to 122 °F)
Data LoggerYes
InterfaceUSB, RS-232
Thickness Range0.08 mm to 635 mm (0.003 in. to 25 in.) depending on material and transducer
DisplayBacklit LCD
Battery TypeThree alkaline or NiMH AA cells
PulserAdjustable square wave pulser
Receiver Bandwidth0.5 MHz to 20 MHz
LanguagesEnglish, French, German, Spanish, Italian, Russian, Japanese, Chinese
Resolution0.001 mm or 0.0001 in.
Transducer Frequency2 MHz to 30 MHz
MaterialPlastic housing

Related product manuals