Olympus 38DL PLUS Basic Operation Manual

DMTA-10009-01EN [U8778346], Rev. D, November 2016
Index 99
Index
A
AA battery holder 33
AC power 32
cord 24
using 32
acoustic properties of test material 74
activating
zoom 58
active file name 77
adjusting
delay value 58
extended and E1 blanks 83
update rate 61
alarm indicator 41
Alkaline batteries
operating time 34
using 33
arrow keys 27
A-scan 40
Australia, RCM compliance 4
AUTO E-TO-E 81
B
basic operation 63
battery
charge 31
charging 34
compartment door 36
full capacity 35
operating time 34
power 33
precautions 10
rechargeable 33
replacement 36
storage instructions 35
usage instructions 35
beeper 49
blank
adjusting 83
thickness value 77
brightness, display 52
C
calibration 66, 73
instrument 67
locked 73
material sound velocity 71
test block 70
THRU-COAT 79
transducer zero compensation 70
caution notes
AC power cord 24, 32
battery replacement 36
ingress protection guarantee 23
CAUTION signal word 8
cautions
instrument compatibility 6
modification prohibited 7
CE (European Community) 11
CE marking 4
changing
display settings 51
echo detection mode 82
language 49
thickness measurement resolution 61
character

Olympus 38DL PLUS Specifications

General

Operating Temperature	-10 °C to 50 °C (14 °F to 122 °F)
Data Logger	Yes
Interface	USB, RS-232
Thickness Range	0.08 mm to 635 mm (0.003 in. to 25 in.) depending on material and transducer
Display	Backlit LCD
Battery Type	Three alkaline or NiMH AA cells
Pulser	Adjustable square wave pulser
Receiver Bandwidth	0.5 MHz to 20 MHz
Languages	English, French, German, Spanish, Italian, Russian, Japanese, Chinese
Resolution	0.001 mm or 0.0001 in.
Transducer Frequency	2 MHz to 30 MHz
Material	Plastic housing