DMTA-10009-01EN [U8778346], Rev. D, November 2016
Software User Interface Elements
43
Figure 3‑6 Parameter screen example
The title bar, located at the top of the parameter screen, indicates the parameter
subject. When you access a parameter screen from a menu, a menu button appears on
the left side of the title bar. You can select this menu button to easily return to the
original menu. One or two help text bars, appearing at the bottom of the screen,
indicate the keys to use to select a parameter and edit its value.
To select a parameter and edit its value
1. Use the [] and [] keys to highlight the desired parameter.
2. For parameters with predefined values, use the [] and [] keys to select the
desired value.
3. In parameter screens containing lists or alphanumeric parameters:
— In a list, use the [] and [] keys to highlight the desired list item.
— For an alphanumeric parameter, use the [] and [] keys to enter the desired
characters (see “Selecting the Text Edit Mode” on page 44 for details).
—Press [2nd F], [] or [2nd F], [] to leave a list or an alphanumeric parameter,
and respectively go to the next or previous screen element.
4. To exit the parameter screen:
Press [MEAS] to return to the measurement screen.
OR
When a menu button appears in the left corner of the title bar, use the [] key
to highlight the menu button, and then press [ENTER] to reopen the menu.
Help text bars
Parameters
Title bar
Menu from which the
screen is accessed
To Next Page
Loading...
Need help?
General
