DMTA-10009-01EN [U8778346], Rev. D, November 2016
Chapter 4
52
— DISPLAY BRIGHTNESS to select one of the predefined brightness levels
(see “Display Brightness” on page 53 for details).
— WAVEFORM RECTIFICATION to select one of the rectification modes (see
“Waveform Rectification” on page 54 for details).
— WAVEFORM TRACE to select one of the trace types (see “Waveform Trace”
on page 55 for details).
— VGA OUTPUT to turn ON or OFF, the VGA signal for the VGA output (see
“Using the VGA Output” on page 86 for details).
Figure 4‑3 The DISPLAY SETTINGS screen
3. Press [MEAS] to return to the measurement screen.
4.4.1 Color Schemes
The 38DL PLUS offers two standard color schemes designed to provide best display
visibility in indoor or outdoor lighting conditions (see Figure 4-4 on page 53). From
the measurement screen, press [DISPLAY] to access the COLOR SCHEME
parameter.
To Next Page
Loading...
