Olympus 38DL PLUS Basic Operation Manual

DMTA-10009-01EN [U8778346], Rev. D, November 2016
Technical Specifications 89
Data output types 2.0 USB client
RS-232
Removable microSD memory card
Calibration setting storage Default single and dual element transducer setups
35 custom single element and 10 custom dual element storage
locations
Calibration Single or two-point calibration test block
Velocity can be entered manually.
Multi-points for custom V-path calibration with dual element
transducers
Display response time Adjustable 4 Hz, 8 Hz, 16 Hz, 20 Hz, and 30 Hz
Number of pixels to display a
waveform
640 × 480 pixels
Printer output RS-232 serial
Table 9 Environmental rating specifications
Parameter Va lu e
IP rating Designed for IP67
Explosive atmosphere MIL-STD-810F, Section 511.4, Procedure I
Shock test MIL-STD-810F, Section 516.5, Procedure I
Vibration test MIL-STD-810F, Section 514.5, Procedure I
Drop test MIL-STD-810F, Section 516.5, Procedure IV- Transit Drop
Table 8 Other EN15317 specifications (continued)
Parameter Va lu e

Olympus 38DL PLUS Specifications

General

Operating Temperature	-10 °C to 50 °C (14 °F to 122 °F)
Data Logger	Yes
Interface	USB, RS-232
Thickness Range	0.08 mm to 635 mm (0.003 in. to 25 in.) depending on material and transducer
Display	Backlit LCD
Battery Type	Three alkaline or NiMH AA cells
Pulser	Adjustable square wave pulser
Receiver Bandwidth	0.5 MHz to 20 MHz
Languages	English, French, German, Spanish, Italian, Russian, Japanese, Chinese
Resolution	0.001 mm or 0.0001 in.
Transducer Frequency	2 MHz to 30 MHz
Material	Plastic housing