DMTA-10009-01EN [U8778346], Rev. D, November 2016
Initial Setup
59
Figure 4ā8 Comparing normal and zoomed display in mode 1
The zoom with single element transducers in mode 2 adjusts the waveform range and
delay so that the interface echo and the first back-wall echo appear on the waveform
display (see Figure 4-9 on page 59).
Figure 4ā9 Comparing normal and zoomed display in mode 2
The zoom with single element transducers in mode 3 adjusts the waveform range and
delay so that the interface echo and the second measured back-wall echo appear on
the waveform display (see Figure 4-10 on page 60).
Normal display Zoomed display
Normal display Zoomed display