120
Chapter 5 Functions
EVIS EXERA II VIDEO SYSTEM CENTER CV-180
6. Click one of the position buttons on the screen. The number of the selected
image appears at the position button and the selected image is edged with a
thick frame in the color of the position button (see Figure 5.71).
Figure 5.71
7. Select up to 4 images repeating steps 4. to 6., and then proceed with
“Annotating” on page 121.
• If you click the position button that is already assigned with
an image, the assignation is cleared.
• If you click an image and then click a position button that is
already assigned with another image, the assigned image
changes.
• The images that are assigned with the position buttons are
edged with a thick frame in the following colors:
“1/4”: Pink
“2/4”: Blue
“3/4”: Green
“4/4”: Yellow
To Next Page
Loading...
