Chapter 9 Function setup
235
EVIS EXERA II VIDEO SYSTEM CENTER CV-180
Iris speed
This menu sets the speed to adjust the brightness of the image according to the
result of the measuring method. The setting in this menu is effective only for the
endoscopes of “Scope A” in see Table 9.33 on page 233.
Figure 9.26
1. Click “ ” of “Iris speed” (see Figure 9.26). The iris speeds appear in the
pull-down menu.
2. Click the desired iris speed. The selected iris speed is displayed.
Setting value Explanation
Iris speed Changes the brightness adjustment speed from three speeds.
Iris L Fine-tunes the darkening speed in the each settings of “Iris speed”.
Iris D Fine-tunes the brightening speed in the each settings of “Iris
speed”.
Table 9.36
Setting value Explanation
Low The brightness adjustment speed is low.
Medium The brightness adjustment speed is medium.
High The brightness adjustment speed is high.
Table 9.37
To Next Page
Loading...
