234
Chapter 9 Function setup
EVIS EXERA II VIDEO SYSTEM CENTER CV-180
1. Click “Brightness” on the system setup menu. The “Brightness setting”
appears on the right side of the window (see Figure 9.25).
Figure 9.25
2. Click “ ” of “Iris” (see Figure 9.25). The measuring methods appear in the
pull-down menu.
3. Click the desired method. The selected mode is displayed.
4. Click “ ” of “Iris auto” (see Figure 9.25). The measuring methods of “Auto”
appear in the pull-down menu.
5. Click the desired method. The selected method is displayed.
When this instrument is turned ON, the latest iris mode
before the video system center is turned OFF comes up
when the instrument is turned ON. When the user preset is
called up, the iris mode that is set in this menu comes up.
Setting value Explanation
Auto
See Table 9.31 and Table 9.32 on page 232.
Peak
Table 9.34
Setting value Explanation
AUTO 1
See Table 9.31 on page 232.AUTO 2
AVE.
Table 9.35
To Next Page
Loading...
