90
Chapter 5 Functions
EVIS EXERA II VIDEO SYSTEM CENTER CV-180
Contrast mode (“Shift” + “F6”)
Pressing these keys changes the contrast of the endoscopic image.
1. Press the “Shift” and “F6” keys together. Every time the two keys are
pressed, the contrast mode changes. The selected mode is displayed on
the monitor (see Figure 5.35).
Figure 5.34
Figure 5.35
• The contrast mode function does not work during the special
light observation.
Mode Explanation
Normal Standard setting
High Darkens the dark part and brightens the bright part compared to the
normal observation.
Low Brightens the dark part and darkens the bright part compared to the
normal observation.
Table 5.6
To Next Page
Loading...
