Chapter 9 Function setup
225
EVIS EXERA II VIDEO SYSTEM CENTER CV-180
Freeze function
This function sets the method of “FREEZE” to pause the endoscopic image.
Figure 9.20
1. Click “ ” of “Freeze mode” (see Figure 9.20). The freeze modes appear in
the pull-down menu.
2. Click the desired freeze mode. The selected mode is displayed.
Setting value Explanation
Field Less blur image can be obtained than frame freeze when the object
moves fast. (Use this mode for routine use.)
Frame Clearer image can be obtained than field freeze when the object does
not move.
Table 9.25
To Next Page
Loading...
