Olympus CV-180 - Scope Nickname

242
Chapter 9 Function setup
EVIS EXERA II VIDEO SYSTEM CENTER CV-180
Scope nickname
The scope nickname is displayed on the monitor, when the endoscope with the
scope nickname function is connected. This menu sets whether the nickname is
displayed on the monitor or not. For the V-scope, “V” is displayed on the monitor.
Figure 9.32
Figure 9.33
1. Click “ ” of “Scope nickname” (see Figure 9.33). The settings “Enable”
and “OFF” appear in the pull-down menu.
2. Click the desired setting. The selected setting is displayed.
Setting value Explanation
Enable Displays the scope nickname.
OFF No display of the scope nickname
Table 9.44
ID
Name:
Sex: Age:
D.O.B.
12/12/2005
12:12:12
Physician:
V
Scope nickname
Scope nickname
setting