134
Chapter 5 Functions
EVIS EXERA II VIDEO SYSTEM CENTER CV-180
• Press the “CAPTURE” key or “RELEASE” key to record the
image without checking the image. In this case, the live
image is frozen for the release time.
• Maintain the endoscope as stationary as possible when
pressing the keys to record the blurless images.
• The maximum number of images per page is variable
depending on the printer model. See Table 5.15 for details.
• Depending on the video printer or the number of images on a
print sheet, the “CAPTURE” key may not be operated during
printing.
• HDTV images can be printed only when using the OEP-4
with “Mode1”. See “Output signal to OEP-4” on page 204.
• The CVP counter does not appear when the patient data are
cleared from the monitor.
• When pressing the “RELEASE” key, the images captured are
displayed at the lower left on the monitor depending on the
settings. When pressing the “CAPTURE” key the images
taken in are displayed in full-screen on the monitor.
• A caption can be printed in the margin on the print sheet. See
“Caption” on page 203.
• The CAPTURE and RELEASE operations can also be
controlled from the scope switches and/or foot switches. For
how to set up the scope switches and foot switches, see
“Remote switch and foot switch (EXERA and VISERA)” on
page 219.
To Next Page
Loading...
