Chapter 8 Installation and Connection
173
EVIS EXERA II VIDEO SYSTEM CENTER CV-180
OEV181H
For connecting the monitor (OEV181H) to the video system center, use the
cables listed below.
For easy cable connection, attach the cable color sheet to the cables (see Figure
8.15).
Set the factory default “FACTORY” of the monitor to
“FACTORY1”, according to the instruction manual of the
monitor. Otherwise, the monitor remote function may not
operate correctly.
Model (length) Product name
Use any one of the following cables.
MAJ-921 (1.5 m)
MAJ-970 (4 m)
MAJ-1462 (7 m)
MAJ-1584 (15 m)
MAJ-1586 (2 m)
Monitor cable
Use either one of the following cables.
MAJ-1161 (4 m)
MAJ-1230 (7 m)
MAJ-1465 (15 m)
HDTV monitor remote cable
Table 8.12
To Next Page
Loading...
