Chapter 9 Function setup
195
EVIS EXERA II VIDEO SYSTEM CENTER CV-180
4. Click “ ” of the list box to open the pull down menu, and click the data in
the pull down menu.
5. Click “Back” or “Esc” to cancel the input data and to go back to the
endoscopic image.
6. Click “OK” after completing input operation. A confirmation message
appears on the monitor.
7. Click “Y” or press “Enter” to store the input data and to go back to the
endoscopic image.
Click “N” to go back to step 2.
To Next Page
Loading...
