200
Chapter 9 Function setup
EVIS EXERA II VIDEO SYSTEM CENTER CV-180
Display of Patient data
All or a part of the text data such as the patient data can be cleared from the
monitor (refer to “Clearing characters from the screen (“F1”)” on page 82). The
following operation sets whether the display status when turning the video
system center OFF is saved or not. In case “Save” is set, the same display
status appears on the monitor when the instrument is turned ON as it was when
the instrument has been turned OFF.
1. Click “ ” of the list box “Remove data”. “Clear” and “Save” appear in the
pull-down menu.
2. Click “Save” or “Clear”. The value selected is displayed.
Setting value Explanation
Clear Displays all text data when the instrument is turned ON.
Save Displays same status as when the instrument is turned OFF.
Table 9.7
To Next Page
Loading...
