210
Chapter 9 Function setup
EVIS EXERA II VIDEO SYSTEM CENTER CV-180
The video signal output
This operation sets the type of video signal output to the monitor.
1. Click “ ” of “RGB/SDI”. The video signals appear in the pull-down menu.
2. Click the desired video signal. The selected video signal is displayed.
CV-180 does not have and SDI input and is therefore not
capable of transferring images from external devices to the
monitor via SDI.
Setting value Explanation
RGB Output RGB video signal to the monitor.
SDI Outputs SDI video signal to the monitor.
Table 9.16
To Next Page
Loading...
