Chapter 9 Function setup
217
EVIS EXERA II VIDEO SYSTEM CENTER CV-180
2. Click “User Data No. #” in the user name list, in which no user is registered.
The background of the selected user name is blue.
3. Click “EDIT” on the right side of the screen (see Figure 9.13).The edit
screen of the user preset menu appears (see Figure 9.14).
Figure 9.14
4. Enter the user name in the text box of “User name”. Otherwise, entered data
cannot be saved.
• Max. 20 alphanumeric and symbol characters can be entered.
5. Click “ ” of the dialog box of the setting values to open the pull down
menu, and click the data on the pull down.
6. To cancel the input, click “Back” or “Esc”. The input values are canceled and
the display returns to the user list menu.
7. After completing data input, click “OK”. A confirmation message appears on
the monitor.
8. Click “N” to return to step 2.
Click “Y” or press “Enter” to save the input values and return to the
endoscopic image.
Button Function
Back Returns to the endoscopic image.
OK Determines and saves the input data (returns to the
endoscopic image).
Default Resets the user preset data to the factory default settings.
Table 9.21
To Next Page
Loading...
