264
Chapter 10 Troubleshooting
EVIS EXERA II VIDEO SYSTEM CENTER CV-180
Image capturing and
display with the video
printer cannot be
performed.
The remote cable is not
connected.
Connect the remote cable
correctly as described in
“Printer” on page 201.
The monitor output setting
is incorrect.
Select the “Printer” output
on the front panel as
described in “Image source
buttons” on page 62.
The monitor remote control
setting is incorrect.
Set it correctly as described
in “Monitor” on page 208.
The remote cable is not
connected to the monitor.
Connect the optional
monitor remote cable.
The monitor brightness
setting is improper.
Set a proper brightness as
described in the monitor's
instruction manual.
The printer setup in the
system setup is incorrect.
Set it properly as described
in “Printer” on page 201.
The image cannot be
stored with the PC card.
The PC card adapter is not
inserted into the PC card
slot of the video system
center properly.
Insert the PC card adapter
properly.
The PC card is not inserted
into the PC card adapter
properly.
Insert the PC card properly.
Available space of the PC
card is low.
Delete unnecessary
images or use a new PC
card.
The image stored with the
PC card cannot be played
back.
The PC card adapter is not
inserted into the PC card
slot of the video system
center properly.
Insert the PC card adapter
properly.
The PC card is not inserted
into the PC card adapter
properly.
Insert the PC card properly.
The image was edited on a
personal computer or
another equipment.
The image cannot be
played back.
Irregularity description Possible cause Solution
To Next Page
Loading...
