Olympus EVIS X1 - A Remote Cable; CV-190;190 Plus;290+Ncare (ISM Product); Function Is under Development in ISM; Ncare Record Status Is Not Shown in CV-1500. Remote Control

◆ CV-190/190PLUS/290+nCare (ISM Product)
85
OEV321UH
nCare
* Refer to OEV321UH for the
connection and setting with
OEV321UH.
<List of Cables>
3G-SDI output
CV-1500
SDI Input
Setting
model
Step Default After change
CV-1500
Setting > System setup > Video output > 3G-SDI OUT
(HD/SD) signal
HD:1080p HD:1080i
Setting > System setup > Peripherals 1 > Video recorder type Not connected Not connected
[SETTING INFORMATION]
1
! Caution !
• Since nCare is not compatible with 4K and HD:1080p, set CV-1500
output to HD:1080i or less.
• nCare record status is not shown in CV-1500. Remote control
function is under development in ISM.
• Touch panel monitor is needed to operate nCare. (refer to nCare
Instruction manual for the connection and setting)
♯
Product
symbol
Name
1
MAJ-2430 3G-SDI Cable 1.5M
MAJ-2015 3G-SDI Cable 3.0M
MAJ-2016 3G-SDI Cable 8.5M
2 N/A Remote Cable
2
*Remote control function is under development in ISM
CV-190/190PLUS/290
* Please refer to CV-190/190PLUS/290 for the setting of connection with CV-190/190PLUS/290.