Omnia Omnia.9 - Navigation Modes

24

UndoMainMenu
TheUndoMainmenucontainsthecontrolstoenableanddisableUndo.

 Whenselected,theBypasscontrolturnsoffboththedeclipperandtheexpanderportions
ofUndo.

 The Enable Declipper and Enable Expanders buttons turn the declipper and expander
portionsofUndoonandoffindependently,respectively.

UndoMeteringMenu
The Undo Metering menu determines which of Undo’s 4 metering functions are displayedinthe
UndoMeterswindow.AmorecomprehensiveexplanationofhowtoreadandunderstandtheUndo
metersisprovidedlaterinthissectionwhenthevariousUndocontrolsareexplained.

 Whenenabled,theShowDynamicsDetectorMeters,ShowExpanderRatioMeters,Show
Speed Governor Meters, and Show Expander Threshold Meters allow the associated
metersforeachrespectivesectiontobedisplayedintheUndoMeterswindow.

