47
WidebandAGC2Menu
TheWidebandAGC2menuprovidesaccesstothesidechaindelay,maximumgain,maximumgain
reduction, ratio, attack, release, progressive release, target, gatethreshold,freeze threshold, and
threebandsidechainparametricequalizercontrols.
TheOmnia.9’sWidebandAGC2controlallowsyoutoinsertoneadditionalAGCprocessing
stageintothechainasfollows:
o A Wideband compressor immediately following the Wideband AGC1 section and
justaheadoftheMultibandAGCandLimiters
o AWidebandcompressorimmediatelyfollowingtheMultibandAGCandLimiters
o ABassOnlycompressorimmediatelyfollowingtheMultibandAGCandLimiters
o A Bass Widebandcompressor,alsoimmediatelyfollowingthe MultibandAGC and
Limiters
The Sidechain Delay, Maximum Gain, Ratio, Attack speed, Release speed, Target, Gate
Threshold,andFreezeThresholdcontrolsworkinthesamemannerastheircounterpartsin
theothersectionsoftheOmnia.9.JustliketheWidebandAGC1section,theMaximumGain
controlintheWidebandAGC1sectionhasarangeof24dB.
TheWidebandAGC2controlenablesordisablestheWidebandAGC2sectionandallowsyou
to choose whether it is situated before or after the Multiband AGC section or used as a
dedicatedBassCompressor.
IfyouusetheAGC2asaBassCompressor,itwillbesituatedaftertheMultibandsectionbut
willaffectonlythelowerbands,andallowyoutopushthebassabitharderwithoutover
driving the final clipper or using excessively fast attack and release speeds in the lower
bandsoftheMultibandAGC.
o Bass Only (“BO”) employs a sidechain filter that allows only the audio from the
lower bands to affect gain, so only the lower frequencies are compressed above
threshold.