Default value: 15 s.
“Acceleration” – acceleration control during vehicle speeding up
Threshold – enter the value of acceleration while speeding up, which exceeding will
trigger registration of dangerous driving
“Lateral acceleration” – acceleration control during vehicle turning
Threshold – enter the value of acceleration while turning, which exceeding will trigger
registration of dangerous driving
“Braking” – acceleration control during vehicle braking
Threshold – enter the value of acceleration while braking, which exceeding will trigger
registration of dangerous driving
“Vertical acceleration (pounding / bumping)” – acceleration control during vehicle
pounding
Threshold – enter the value of acceleration while pounding or bumping, which
exceeding will trigger registration of dangerous driving
“Speed and threshold exceeding of potential UI1”
Threshold – enter the value of speed, which exceeding will trigger registration of
dangerous driving, if universal input No.1 is closed/open.
“Speed and threshold exceeding of potential UI2”
Threshold – enter the value of speed, which exceeding will trigger registration of
dangerous driving, if universal input No.2 is closed/open.
The notification for the event "Speed and Exceeding of threshold of potential UI1,
UI2" is generated only when the selected speed source is "GPS" (see Selection of
Speed Source).
“Send SMS for selected events” – enable SMS sending upon registration of
dangerous driving
“Send photo for selected events” – enable digital camera photo sending upon
registration of dangerous driving
“Sound notification” – enable/disable sound notification if thresholds of monitored
parameters are exceeded. To run sound notification connect a sound emitter to
To Next Page
Loading...
