No.20S062-00
15/55
STC-LBGP251BCXP124 / STC-LCGP251BCXP124 / STC-LBGP251BCXP124-T / STC-LCGP251BCXP-T
Product Specifications and User’s Guide
5.5.2 Power/IO Connector
HR10A-7R-6PB (Hirose) or equivalent.
This connector is for external power supply and, input and output signals.
As for the cable part (Female connector), HR10A-7P-6S (Hirose) or equivalent can be used.
Pin assignment
Output signal selection for Line 0 to 3
The output signal can be selectable from below:
Off
User Output
Trigger Out
Trigger Through Out
Exposure End Out
Frame End Out
Frame Trigger Wait
Transfer End Out
Sensor Read Out
Strobe Out
Exposure Active
Pin No. Signal Name
IN/OUT Signal Voltage
1 GND IN 0 V
2 Line3 IN/OUT +3.3 V
3 Line2 IN/OUT +3.3 V
4 Line1 IN/OUT +3.3 V
5 Line0 IN/OUT +3.3 V
6 +24 V IN +24 V
To Next Page
Loading...
