No.20S062-00
27/55
STC-LBGP251BCXP124 / STC-LCGP251BCXP124 / STC-LBGP251BCXP124-T / STC-LCGP251BCXP-T
Product Specifications and User’s Guide
9.3 Pixel Format
This parameter sets the image format from camera can be set on Pixel Format.
GenICam Parameters
PixelFormat IEnumeration Type Sets Pixel Format.
The following chart shows available Pixel Formats on camera:
Output Bit Pixel Format
Monochrome Color
8bits Mono8 (Default) BayerRG8 (Default)
10bits Mono10 BayerRG10
The format specified on GenICam PFNC (Pixel Format Naming Convention).
9.4 Frame rate
This parameter sets the frame rare (fps) of output image from camera.
GenICam Parameters
AcquisitionFrameRate
IFloat Type Sets frame rate in Hz unit (*1)
Range is changed with exposure time and pixel format settings
Default: 150.183036 (at CXP-12, 4 lane, 8bits)
(*1) The approximate value of set value, sets to camera and display it.
9.5 Exposure Time
This parameter sets variable exposure time.
GenICam Parameters
ExposureMode IEnumeration Type
Exposure control selection
Selection: “Off”, “Timed” and “TriggerWidth”
Off: Exposure time is “1 / Frame rate” (Default)
Timed: Exposure time is “ExposureTime”
TriggerWidth: Exposure time is active pulse duration of trigger signal
ExposureTime
[ExposureTime
Selector]
IFloat Type Exposure time (in μsecond) (*1)
Range: 8.000000 to 16,777,215.000000
Default: 6,626
(*1) The approximate value of set value, sets to camera and display it.
To Next Page
Loading...
