Omron CoaXPress STC-LBGP251BCXP124

No.20S062-00
33/55
STC-LBGP251BCXP124 / STC-LCGP251BCXP124 / STC-LBGP251BCXP124-T / STC-LCGP251BCXP-T
Product Specifications and User’s Guide
9.13 ROI (Region of Interest)
This sets the ROI in order to output selected area of image.
The frame rate increases when reducing height of image. The frame rate does not change when reducing width of
image.
Please use “Multi ROI” settings when setting multi ROI.
When selecting Binning or Decimation function, setting value of Width, Height, OffsetX and OffsetY will be half of full
resolution image. (Minimum value and setting steps do not change)
The frame rate does not increase when selecting Binning or Decimation function.
9.13.1 ROI (One Region)
GenICam Parameters
Width IInteger Type Horizontal (Pixel) size
Range: 256 to 5,120 pixels
Default: 5,120 pixels
Setting steps: 8 pixels
Sets the width of image. “Width + OffsetX” should not exceed maximum width.
Height IInteger Type Vertical (Line) size
Range: 4 to 5,120 lines
Default: 5,120 lines
Setting steps: 2 lines
Sets the height of image. “Height + OffsetY” should not exceed maximum
height.
When using multi ROI, please sets total height of multiple ROIs.
OffsetX IInteger Type Horizontal (Pixel) offset
Range: 0 to 4,864 pixels
Default: 0 pixels
Setting steps: 2 pixels
OffsetY IInteger Type Vertical (Line) offset
Range: 0 to 5,116 lines
Default: 0 lines
Setting steps: 2 lines
The parameters define as following chart.
Width
Height
OffsetX
OffsetY
ROI Region