No.20S062-00
32/55
STC-LBGP251BCXP124 / STC-LCGP251BCXP124 / STC-LBGP251BCXP124-T / STC-LCGP251BCXP-T
Product Specifications and User’s Guide
9.12 Decimation
When using Decimation mode, decimated image can be output.
The images below show decimated pixels (red squares) where they are output.
<Monochrome> <Color>
Decimation X (OFF), Y (OFF) Decimation X (ON), Y (ON)Decimation X (OFF), Y (OFF) Decimation X (ON), Y (ON)
GenICam Parameters
DecimationHorizontal
IInteger Type Sets decimation on horizontal direction
1: Disable Decimation, 2: Decimate one of two pixels
Default: 1
DecimationVertical IInteger Type Sets decimation on vertical direction
1: Disable Decimation, 2: Decimate one of two pixels
Default: 1
* Note.1: It is necessary to set setting for “DecimationHorizontal” and “DecimationVertical”.
* Note.2: It is necessary to set less than “1 frame period time” exposure time to increase frame rate.
* Note.3: Binning and Decimation function cannot be use simultaneously.
To Next Page
Loading...
