No.20S062-00
51/55
STC-LBGP251BCXP124 / STC-LCGP251BCXP124 / STC-LBGP251BCXP124-T / STC-LCGP251BCXP-T
Product Specifications and User’s Guide
11.6 AnalogControl
Name Description
GainSelector Selects which Gain is controlled by the various Gain features.
Gain [GainSelector] Controls the selected gain as an absolute physical value. This is an amplification factor
applied to the video signal.
BlackLevelSelector Selects which Black Level is controlled by the various Black Level features.
BlackLevel [BlackLevelSelector] Controls the black level as an absolute physical value. This represents a DC offset
applied to the video signal.
BalanceRatioSelector Selects which Balance ratio to control.
BalanceRatio [BalanceRatioSelector] Controls ratio of the selected color component to a reference color component. It is
used for white balancing.
BalanceWhiteAuto Controls the mode for automatic white balancing between the color channels. The white
balancing ratios are automatically adjusted.
Gamma Controls the gamma correction of pixel intensity.
11.7 LUTControl
Name Description
PixelCorrectionAllEnabled Enable pixel correction for all pixels.
PixelCorrectionEnabled Determine if targeted pixel is enabled for pixel correction.
PixelCorrectionIndex Determine index of targeted pixel for pixel correction.
PixelCorrectionX Determine x-coordinate of targeted pixel for pixel correction.
PixelCorrectionY Determine y-coordinate of targeted pixel for pixel correction.
To Next Page
Loading...
