Omron CoaXPress STC-LBGP251BCXP124

No.20S062-00
29/55
STC-LBGP251BCXP124 / STC-LCGP251BCXP124 / STC-LBGP251BCXP124-T / STC-LCGP251BCXP-T
Product Specifications and User’s Guide
9.8 Black Level
This parameter sets the black level (clamp level for black signal).
The lower limit of signal is clamped at this setting level. The signal does not lower than this.
GenICam Parameters
BlackLevel [BlackLevelSelector] IFloat Type Black Level
Range:
8bits output: 0 to 31
10bits output: 0 to 127
Default: 10 (at 8bits)
9.9 Gain
The gain has Analog Gain and Digital Gain.
9.9.1 Analog Gain
This parameter sets analog gain.
GenICam Parameters
GainSelector IEnumeration Type AnalogAll
Gain
[GainSelector]
IFloat Type Analog Gain (*1)
Selection: 1: x1.5, 2: x2, 3: x2.5
Default: 3 (x2.5)
(*1) When selecting other than “3”, image may not saturate due to characteristic of image sensor.
(*1) It takes about 140 msec when changing this parameter.
9.9.2 Digital Gain
This parameter sets digital gain.
GenICam Parameters
GainSelector IEnumeration Type DigitalAll
Gain
[GainSelector]
IFloat Type Digital Gain
Range: 0 to 1,536
Default: 0
Digital Gain Formula
Gain (x times) = 1 + (Digital Gain / 256)