No.20S062-00
38/55
STC-LBGP251BCXP124 / STC-LCGP251BCXP124 / STC-LBGP251BCXP124-T / STC-LCGP251BCXP-T
Product Specifications and User’s Guide
9.17 Pixel Defect Correction
The defected pixel corrects with horizontally beside pixel information.
The defected pixel corrects with horizontally beside same color pixel information for color model.
The coordination of defected pixels can be save to camera (UserSetSave) or load from camera (UserSetLoad).
When selecting “Default” UserSet, it is factory default data and cannot overwrite.
The coordination of defected pixels is one common data for UserSet0 to UserSet7.
GenICam Parameters
PixelCorrectionAllEnabled
IBoolean Type
Switch ON / OFF for Pixel Defect Correction
True: On (Default), False: Off
PixellCorrectionEnabled IBoolean Type
Switch ON / OFF for pixel defect correction for Index was selected at
“PixelCorrectionIndex”
True: On, False: Off (Default)
PixelCorrectionIndex IInteger Type Pixel Correction Index
Range: 0 to 2,047
Default: 0
PixelCorrectionX IInteger Type Defect position on X coordinate for Index was selected at
“PixelCorrectionIndex”
Range: 0 to 5,119
Default: 0
PixelCorrectionY IInteger Type Defect position on Y coordinate for Index was selected at
“PixelCorrectionIndex”
Range: 0 to 5,119
Default: 0
To Next Page
Loading...
