No.20S062-00
31/55
STC-LBGP251BCXP124 / STC-LCGP251BCXP124 / STC-LBGP251BCXP124-T / STC-LCGP251BCXP-T
Product Specifications and User’s Guide
9.11 Binning (Only available for monochrome model)
Binning is summing and averaging beside pixels into one pixel.
The pixel data inside of red square add or average as one pixel.
Binning X (OFF: 1), Y (OFF: 1)
Binning X (ON: 2), Y (ON: 2)
GenICam Parameters
BinningHorizontalMode IEnumeration Type
Sets Binning mode on horizontal direction
Sum: Summing mode (Default)
Average: Average mode
BinningHorizontal IInteger Type Sets Binning on horizontal direction
1: Disable Binning 2: Binning 2 Pixel
Default: 1
BinningVerticalMode IEnumeration Type
Sets Binning mode on vertical direction
Sum: Summing mode (Default)
* Does not support Average for vertical direction
BinningVertical IInteger Type Sets Binning on vertical direction
1: Disable Binning 2: Binning 2 Pixel
Default: 1
* Note.1: It is necessary to set setting for “BinningHorizontal” and “BinningVertical”.
* Note.2: It is necessary to set less than “1 frame period time” exposure time to increase frame rate.
* Note.3: Binning and Decimation function cannot be use simultaneously.
To Next Page
Loading...
