Omron CoaXPress STC-LBGP251BCXP124

No.20S062-00
41/55
STC-LBGP251BCXP124 / STC-LCGP251BCXP124 / STC-LBGP251BCXP124-T / STC-LCGP251BCXP-T
Product Specifications and User’s Guide
9.19.2 Loading Camera Settings
Setting Procedure
1. Select “UserSetX” (or Default) at “UserSetSelector”
2. Execute “UserSetLoad”
9.19.3 Loading Camera Settings when the Camera Power is on
Setting Procedure
1. Set “UserSetX” or “Default” at “UserSetDefault”
9.19.4 Camera Settings Initialization
Please follow the below procedure for camera settings put back to factory default settings.
Setting Procedure
1. Selects “Default” at “UserSetSelector”.
2. Executes “UserSetLoad”.
3. Selects “UserSetX” at “UserSetSelector”
4. Execute “UserSetSave”
When UserSetLoad is executing,
the camera settings load from selected ROM
that was selected at “UserSetSelector” to
register at RAM.
When the camera power is on,
the camera settings load from selected ROM
that was selected at “UserSetDefault” to
register at RAM.
ROM
UserSetX
ROM
Default
Camera
Setting
UserSetDefault
Selector
ROM
UserSetX
ROM
Default
Camera
Setting
UserSetSelector
Selector