Omron SYSMAC FH Series

3 Configuration
3 - 80
Vision System FH/FZ5 series Hardware Setup Manual (Z366)
3-8 Sysmac Studio
When you connect the FH-1000 or FH-3000 Sensor Controller and Sysmac Studio Standard Edi-
tion/Version Edition, use the latest version.
FH Series Version of FH Series Corresponding version of Sysmac Studio Standard Edition/Vision Edition
FH-3050 (-)
FH-1050 (-)
Version 5.60 Supported by version 1.15 or higher
Version 5.50 Supported by version 1.14.89 or higher.
Version 5.30 Supported by version 1.10.80 or higher.
Version 5.20 Supported by version 1.10 or higher.
Version 5.10 Supported by version 1.07.43 or higher.
Version 5.00 Supported by version 1.07 or higher. Not suppo
rted by version 1.06 or lower.