19
Precautions for Correct Use
Vision System FH/FZ5 series Hardware Setup Manual (Z366)
Precautions for Correct Use
Install and store the product in a location that meets the following conditions:
• Surrounding temperature of 0 to +50°C
• No rapid changes in temperature (place where dew does not form)
• Relative humidity of between 35 to 85%RH
• No presence of corrosive or flammable gases
• Place free of dust, salts and iron particles
• Place free of vibration and shock
• Place out of direct sunlight
• Place where it will not come into cont
act with water, oils or chemicals
• Place not affected by strong electro-magnetic waves
• Place not near to high-voltage, or high-power equipment
Install and store the product in a location that meets the following conditions:
• Surrounding temperature of the following environment:
• Installation: 0 to 55°C in
• Storage: -25 to 70°C
• No rapid changes in temperature and place where dew does not form
• Relative humidity of between 10 to 90% RH
• No presence of corrosive or flammable gases
• Place free of dust, salts and iron particles
• Place free of vibration and shock
• Place out of direct sunlight
• Place where it will not come into cont
act with water, oils or chemicals
• Place not affected by strong electro-magnetic waves
• Place not near to high-voltage, or high-power equipment
• For good heat dissipation, install the product only in the position written this manual or Instruction
Sheet so as not to block the ventilation holes.
Installation and Storage Sites for FH-1000, FH-3000, FZ5-1200,
FZ5-1100, FZ5-800, FZ5-600, FZ5-L Series
Installation and Storage Sites: FH-L series
Orientation of Product
To Next Page
Loading...
Need help?
General
