Omron SYSMAC FH Series

2 - 11
2 Overview of FH/FZ5 series
Vision System FH/FZ5 series Hardware Setup Manual (Z366)
2-3 Flow of Use Procedure
2
2-3 Flow of Use Procedure
The following table shows the flow for using the FH/FZ5.
Procedure Description Reference
Preparations
Installation and Wiring
Section 4 Handling and
Installation Environment
Section 5 Setup and
Wiring
↓
Turning ON Power
5-1 When turning ON and
OFF on page 5-3
↓
Language Selection in Dialog Box (only when the Sensor Con-
troller is started for the first time)
Vision System FH/FZ5
series User's Manual (Cat.
No
. Z365)
↓
Main Window (Layout 0) Display
Vision System FH/FZ5
series User's Manual (Cat.
No. Z365)
↓
Camera Adjustments (Display the settings dialog box for a Cam-
era Image Input processing item.)
Vision System FH/FZ5
series User's Manual (Cat.
No
. Z365)
↓
Select [Tool] − [System settings], and then under [Startup set-
ting], set the settings for [Basic], [Communi
cation], and [Opera-
tion mode].
Vision System FH/FZ5
series User's Manual (Cat.
No
. Z365)
↓
Click the [Data save] button, and then select [Function] − [Sys-
tem restart].
Vision System FH/FZ5
series User's Manual (Cat.
No
. Z365)
↓
Select [Tool] − [System settings], and then set the settings for
[Camera], [Communication] and [Other].
Vision System FH/FZ5
series User's Manual (Cat.
No
. Z365)
↓
Click the [Data save] button, and then select [Function] − [Sys-
tem restart].
Vision System FH/FZ5
series User's Manual (Cat.
No
. Z365)
↓
Scene Editing
In the Main Window (layout 0), edit the measurement flow.
• Register processing items.
• Set the properties for each processing item.
Vision System FH/FZ5
series User's Manual (Cat.
No
. Z365)
↓
Click the [Data save] button.
Vision System FH/FZ5
series User's Manual (Cat.
No. Z365)
↓↑